Connectivity Guide

Where can I nd additional installation information for my specic device?
See the Setup Guide shipped with your device or the platform-specic Installation Guide on the Dell EMC Support page at dell.com/
support.
Hardware
What are the default console settings for ON-Series devices?
• Set the data rate to 115200 baud
• Set the data format to 8 bits, stop bits to 1, and no parity
• Set ow control to none
How do I view the hardware inventory?
Use the show inventory command to view complete system inventory.
How do I view the process-related information?
Use the show processes node-id node-id-number [pid process-id] command to view the process CPU utilization
information.
Conguration
How do I enter CONFIGURATION mode?
Use the configure terminal command to change from EXEC mode to CONFIGURATION mode.
I made changes to the running conguration le but the updates are not showing. How do I view my changes?
Use the show running-configuration command to view changes that you have made to the running-conguration le. Here are
the dierences between the available conguration les:
• startup-conguration contains the conguration applied at device startup
• running-conguration contains the current conguration of the device
• candidate-conguration is an intermediate temporary buer that stores conguration changes prior to applying them to the running-
conguration
Security
How do I add new users?
Use the username commands to add new users. Use the show users command to view a list of current users.
How do I view RADIUS transactions to troubleshoot problems?
Use the debug radius command.
How do I view the current DHCP binding information?
Use the show ip dhcp binding command.
Troubleshoot OS10
1199