Connectivity Guide

no shutdown
switchport access vlan 10
!
interface ethernet1/1/2
no shutdown
switchport access vlan 10
!
interface ethernet1/1/3
no shutdown
switchport access vlan 10
!
interface ethernet1/1/4
no shutdown
switchport access vlan 10
Supported Releases 10.4.0E(R1) or later
description (Interface)
Congures a textual description of an interface.
Syntax
description string
Parameters string — Enter a text string for the interface description. A maximum of 240 characters.
Default Not congured
Command Mode INTERFACE
Usage Information
• To use special characters as a part of the description string, enclose the string in double quotes.
• Spaces between characters are not preserved after entering this command unless you enclose the entire
description in quotation marks; for example, “text description”.
• Enter a text string after the description command to overwrite any previously congured text string.
•
Use the show running-configuration interface command to view descriptions congured for
each interface.
• The no version of this command deletes the description.
Example
OS10(conf-if-eth1/1/7)# description eth1/1/7
Supported Releases 10.2.0E or later
duplex
Congures Duplex mode on the Management port.
Syntax
duplex {full | half | auto}
Parameters
• full — Set the physical interface to transmit in both directions.
• half — Set the physical interface to transmit in only one direction.
• auto — Set the port to auto-negotiate speed with a connected device.
Defaults Not congured
Command Mode CONFIGURATION
176 Interfaces