Connectivity Guide

Conguration guidelines
When conguring dierent modes; for example, F_Port, NPG, or FSB, consider the following:
• F_Port, NPG, and FSB modes are mutually exclusive. You can enable only one at a time.
• You can enable the mode-specic commands only after enabling the specic feature.
• Before you disable the F_Port and NPG features, delete the mode-specic congurations. When you disable FSB, the system
automatically removes the congurations.
F_Port commands
The following commands are supported on F_Port mode:
fc alias
Creates an FC alias. After creating the alias, add members to the FC alias. An FC alias can have a maximum of 255 unique members.
Syntax
fc alias alias-name
Parameters alias-name — Enter a name for the FC alias.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC alias. To delete an FC alias, rst remove it from the FC zone.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported Releases 10.3.1E or later
fc zone
Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 255 unique members.
Syntax
fc zone zone-name
Parameters zone-name — Enter a name for the zone.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC zone. To delete an FC zone, rst remove it from the FC zoneset.
Example
OS10(config)# fc zone hba1
OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19
OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8
Supported Releases 10.3.1E or later
232 Fibre Channel