Connectivity Guide

Parameters
• add — Attach the network policy to an interface.
• remove — Remove the network policy from an interface.
• number — Enter a network policy index number, from 1 to 32.
Default Not congured
Command Mode INTERFACE
Usage Information Attach only one network policy for per interface.
Example
OS10(conf-if-eth1/1/5)# lldp med network-policy add 1
Supported Release 10.2.0E or later
lldp med tlv-select
Congures the LLDP-MED TLV type to transmit or receive.
Syntax
lldp med tlv-select {network—policy | inventory}
Parameters
• network-policy — Enable or disable the port description TLV.
• inventory — Enable or disable the system TLV.
Default Enabled
Command Mode INTERFACE
Usage Information None
Example
OS10(conf-if-eth1/1/3)# lldp med tlv-select network-policy
Supported Releases 10.2.0E or later
lldp port-description-tlv advertise
Species whether to advertise the interface description or the port id in the port description TLV.
Syntax
lldp port-description-tlv advertise [description | port-id]
Parameters
• description—Advertise interface description.
• port-id—Advertise port id.
Default Interface description is advertised.
Command Mode INTERFACE
Usage Information Determines whether to advertise the interface description or the port id in the port description TLV.
Example
OS10(conf-if-eth1/1/1)# lldp port-description-tlv advertise description
OS10(conf-if-eth1/1/1)# lldp port-description-tlv advertise port-id
Supported Releases 10.4.3.0 or later
304 Layer 2