Connectivity Guide

4 Congure the IP addresses on the Management port, where x.x.x.x represents your internal IP address. After you congure the

Management port, the response is up.

$ ifconfig eth0 x.x.x.x netmask 255.255.0.0 up

5 Install the software on the device. The installation command accesses the OS10 software from the specied SCP, TFTP, or FTP URL,

creates partitions, veries installation, and reboots itself.

$ onie-nos-install image_filename location

For example, enter

ONIE:/ # onie-nos-install ftp://a.b.c.d/PKGS_OS10–Enterprise-x.x.xx.bin

Where a.b.c.d represents the location to download the image le from, and x.x.xx represents the version number of the software to

install.

The OS10 installer image creates several partitions, including OS10-A (active and default) and OS10-B (standby). After installation

completes, the switch automatically reboots and loads OS10.

Install manually using USB drive

You can manually install the OS10 software image using a USB device. Verify that the USB device supports a FAT or EXT2 le system. For

instructions to format a USB device in FAT or EXT2 format, see the accompanying Windows documentation for FAT formatting or Linux

documentation for FAT or EXT2 formatting.

1 Plug the USB storage device into the USB storage port on the switch.

2 Power up the switch to automatically boot using the ONIE: Rescue option.

3 (Optional) Stop ONIE discovery if the device boots to ONIE: Install.

$ onie-discovery-stop

4 Create a USB mount location on the system.

$ mkdir /mnt/media

5 Identify the path to the USB drive.

$ fdisk -l

6 Mount the USB media plugged in the USB port on the device.

$ mount -t vfat usb-drive-path /mnt/media

7 Install the software from the USB, where /mnt/media species the path where the USB partition is mounted.

$ onie-nos-install /mnt/media/image_file

The ONIE auto-discovery process discovers the image le at the specied USB path, loads the software image, and reboots the switch.

See the ONIE User Guide for more information.

Log into OS10

To log in to OS10 Enterprise Edition, power up the switch and wait for the system to perform a power-on self test (POST). Enter admin

for both the default user name and user password. For better security, change the default admin password during the rst OS10 login.

The system saves the new password for future logins. After you change the password through the CLI, enter the

write memory

command to save the conguration.

OS10 login: admin

Password:

Last login: Wed Mar 6 07:26:37 UTC 2019 from 10.16.127.145 on pts/0

Linux AG2 4.9.110 #1 SMP Debian 4.9.110-3+deb9u4 x86_64

The programs included with the Debian GNU/Linux system are free software;

the exact distribution terms for each program are described in the

individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent

permitted by applicable law.

Getting Started