Connectivity Guide

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-

-* Dell EMC Network Operating System (OS10) *-

-* *-

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-

This product is protected by U.S. and international copyright and

intellectual property laws. Dell EMC and the Dell EMC logo are

trademarks of Dell Inc. in the United States and/or other

jurisdictions. All other marks and names mentioned herein may be

trademarks of their respective companies.

WARNING: Cluster manager is still using default credentials

%Warning : Default password for admin account should be changed to secure the system

Install OS10 license

If OS10 is factory-loaded on your switch, you do not need to install an OS10 license. If you download OS10 on a trial basis, OS10 comes with

a 120-day trial license. To continue with uninterrupted use, purchase and install a perpetual license to avoid the OS10 device rebooting every

72 hours.

After you install OS10 and log in, install the license to run OS10 Enterprise Edition beyond the trial period. For more information, see

Download OS10 image and license. The OS10 license is installed in the /mnt/license directory.

1 Download the License.zip le from DDL as described in Download OS10 image and license.

2 Open the zip le and locate the license le in the Dell folder. Copy the license le to a local or remote workstation.

3 Install the license le from the workstation in EXEC mode.

license install {ftp: | http: | localfs: | scp: | sftp: | tftp: | usb:} filepath/filename

• ftp://userid:passwd@hostip/filepath — Copy from a remote FTP server.

• http://hostip/filepath — Copy from a remote HTTP server.

• http://hostip — Send request to a remote HTTP server.

• localfs://filepath — Install from a local le directory.

• scp://userid:passwd@hostip/filepath — Copy from a remote SCP server.

• sftp://userid:passwd@hostip/filepath — Copy from a remote SFTP server.

• tftp://hostip/filepath — Copy from a remote TFTP server.

• usb://filepath — Install from a le directory on a storage device connected to the USB storage port on the switch.

• filepath/filename — Enter the directory path where the license le is stored.

Install license — SCP

OS10# license install scp://user:userpwd@10.1.1.10/CFNNX42-NOSEnterprise-License.xml

License installation success.

Install license — localfs

Follow these steps to install a license from a local le directory:

1 Copy the license le from the ftp server location to the home directory on the system.

OS10# copy ftp://admin:admin@10.11.95.101//home/admin/LADF/7B900Q2-NOSEnterprise-License.XML

home://7B900Q2-NOSEnterprise-License.XML

2 (optional) Use the show copy-file status command to check the status of the le copy.

OS10# show copy-file status

File Transfer State: idle

--------------------------------------------------

Getting Started