Connectivity Guide

State Detail: idle
Task Start: 2019-02-15T00:46:35Z
Task End: 2019-02-15T00:46:36Z
Transfer Progress: 100 %
Transfer Bytes: 3795 bytes
File Size: 3795 bytes
Transfer Rate: 8 kbps
3 Verify that the license is present in the home directory of your system.
OS10# dir home
Directory contents for folder: home
Date (modified) Size (bytes) Name
--------------------- ------------ -----------------------
2019-02-15T00:47:25Z 3795 7B900Q2-NOSEnterprise-License.XML
4 Execute the license install command specifying the path to the home directory location where the license was downloaded in
step 1.
OS10# license install localfs://home/admin/7B900Q2-NOSEnterprise-License.XML
[ 5784.994389] EXT4-fs error (device dm-0): ext4_has_uninit_itable:3039: comm
CPS_API_instanc: Inode table for bg 0 marked as needing zeroing
License installation success.
Verify license installation
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : Dell
Product Name : S3048ON
Hardware Version : A01
Platform Name : x86_64-dell_s3000_c2338-r0
PPID : CN08YWFG282983APSU02
Service Tag : 7B900Q2
Product Base :
Product Serial Number:
Product Part Number :
License Details
----------------
Software : OS10-Enterprise
Version : 10.4.3.0
License Type : PERPETUAL
License Duration: Unlimited
License Status : Active
License location: /mnt/license/7B900Q2.lic
---------------------------------------------------------
Troubleshoot license installation failure
An error message displays if the installation fails.
License installation failed
1 Verify the installation path to the local or remote license location.
2 Check the log on the remote server to nd out why the FTP or TFTP le transfer failed.
3 Ping the remote server from the switch — use the ping and traceroute commands to test network connectivity. Check the
following if ping fails:
• If the remote server is reachable through the management route, check if the management route is congured correctly.
• If the remote server is reachable through a front-panel port, check if the static or dynamic route is present.
4 Install the server with the license le on the same subnet as the switch.
5 Check if the server is up and running.
36
Getting Started