Connectivity Guide

LineSpeed auto
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout: 240
Last clearing of "show interface" counters Queueing strategy: fifo Time since last interface
status change:
VLAN commands
description (VLAN)
Adds a description to the selected VLAN.
Syntax
description description
Parameters description — Enter a text string to identify the VLAN. A maximum of 80 characters.
Default Not congured
Command Mode INTERFACE-VLAN
Usage Information None
Example
OS10(conf-if-vlan)# description vlan3
Supported Releases 10.2.0E or later
interface vlan
Creates a VLAN interface.
Syntax
interface vlan vlan-id
Parameters vlan-id — Enter the VLAN ID number, from 1 to 4093.
Default VLAN 1
Command Mode CONFIGURATION
Usage Information FTP, TFTP, MAC ACLs, and SNMP operations are not supported. IP ACLs are supported on VLANs only. The no
version of this command deletes the interface.
Example
OS10(config)# interface vlan 10
OS10(conf-if-vl-10)#
Supported Releases 10.2.0E or later
show vlan
Displays VLAN congurations.
Syntax
show vlan vlan-id
Parameters vlan-id — (Optional) Enter a VLAN ID number, from 1 to 4093.
Default Not congured
Command Mode EXEC
Layer 2 373