Connectivity Guide

Parameters
• management—Enter the keyword management to congure a DNS name server for the management VRF
instance.
• vrf-name—Enter the name of the non-default VRF instance to congure a DNS name server for that VRF
instance.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the name server from the management or non-default VRF instance.
Example
OS10(config)# ip name-server vrf management
or
OS10(config)# ip name-server vrf blue
Supported Releases 10.4.0E(R1) or later
ip route-import
Imports an IPv4 static route into a VRF instance from another VRF instance.
Syntax
[no] ip route-import route-target
Parameters
• route-target — Enter the route-target of the non-default VRF instance, from 1 to 65535.
Default Not congured
Command Mode VRF CONFIG
Usage Information
You can import routes corresponding only to a non-default or a default VRF instance. You cannot import routes
that belong to a management VRF instance into another VRF instance.
Use the no form of this command to remove the imported routes.
Example
OS10(conf-vrf)# ip route-import 1:1 ==> No route-map attached
Supported Releases 10.4.3.0 or later
ip route-export
Exports an IPv4 static route from one VRF instance to another.
Syntax
[no] ip route-export route-target [route-map route-map-name]
Parameters
• route-target — Enter the route-target of the VRF instance.
• route-map route-map-name — (Optional) Enter the route-map name to specify the route-map.
Default Not congured
Command Mode VRF CONFIG
Usage Information
You can export routes corresponding only to a non-default or a default VRF instance. You cannot export routes
that belong to a management VRF instance.
Layer 3 403