Manualshelf

Connectivity Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON
41424344454647484950
Reason : ZTD process completed successfully at Mon Jul 16 19:31:57 2018
-----------------------------------
OS10# show ztd-status
-----------------------------------
ZTD Status : disabled
ZTD State : failed
Protocol State : idle
Reason : ZTD process failed to download post script file
-----------------------------------
•
ZTD Status — Current operational status: enabled or disabled.
• ZTD State — Current ZTD state: initialized, in-progress, successfully completed, failed, or canceled while in
progress.
• Protocol State — Current state of ZTD protocol: initialized, idle while waiting to enable or complete ZTD
process, waiting for DHCP post-hook callback, downloading les, installing image, executing pre-cong or post-
cong CLI commands, or executing post-ZTD script le.
• Reason — Description of a successful or failed ZTD process.
Supported Releases 10.4.1.0 or later
ztd cancel
Stops ZTD while in progress. After you cancel ZTD, you can enter CLI commands to congure the switch.
Syntax
ztd cancel
Parameters None
Default ZTD is enabled.
Command Mode EXEC
Usage Information When ZTD is enabled, the command-line interface is locked. You cannot enter OS10 conguration commands. Use
the ztd cancel command to cancel the ZTD process and return to CLI conguration mode. You can enter ztd
cancel only when ZTD is in a waiting state; that is, before it receives an answer from the DHCP server.
Otherwise, the command returns an error message.
Example
OS10# ztd cancel
Supported Releases 10.4.1.0 or later
Remote access
You can remotely access the OS10 command-line interface (CLI) and the Linux shell. When you install OS10 the rst time, connect to the
switch using the serial port.
Congure remote access
• Congure the Management port IP address
• Congure a default route to the Management port
• Congure a user name and password
Remote access OS10 CLI
1 Open an SSH session using the IP address of the device. You can also use PuTTY or a similar tool to access the device remotely.
ssh admin@ip-address
password: admin
42
Getting Started