Connectivity Guide
Usage Information
• This command can be used to enable or disable BFD for all the congured IPv6 static route for specied VRF. If
VRF name is not specied the command will be applicable for default VRF.
Example
OS10(config)# ipv6 route bfd interval 250 min_rx 250 multiplier 4 role active
Supported releases 10.4.2E or later
show bfd neighbors
Displays information about BFD neighbors from all interfaces using the default VRF.
Syntax
show bfd neighbors [detail]
Parameters detail — (Optional) View detailed information about BFD neighbors.
Default Not congured
Command Mode EXEC
Usage Information Use the show bfd neighbors command to verify that a BFD session between neighbors is up using the default VRF instance. Use the detail parameter to view the BFD session parameters.
Example
OS10# show bfd neighbors
* - Active session role
----------------------------------------------------------------------------
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult VRF Clients
----------------------------------------------------------------------------
* 150.150.1.2 150.150.1.1 vlan10 up 1000 1000 5 default bgp
OS10# show bfd neighbors detail
Session Discriminator: 1
Neighbor Discriminator: 2
Local Addr: 150.150.1.2
Local MAC Addr: 90:b1:1c:f4:ab:fd
Remote Addr: 150.150.1.1
Remote MAC Addr: 90:b1:1c:f4:a4:d4
Interface: vlan10
State: up
Configured parameters:
TX: 1000ms, RX: 1000ms, Multiplier: 5
Actual parameters:
TX: 1000ms, RX: 1000ms, Multiplier: 5
Neighbor parameters:
TX: 200ms, RX: 200ms, Multiplier: 49
Role: active
VRF: default
Client Registered: bgp
Uptime: 01:58:09
Statistics:
Number of packets received from neighbor: 7138
Number of packets sent to neighbor: 7138
show bfd neighbors
* - Active session role
------------------------------------------------------------------------------------------------------------------------------------------
LocalAddr RemoteAddr Interface State RxInt TxInt Mult VRF Clients
---------------------------------------------------------------------------------------------------------------------------------------*
100.1.3.2 100.1.3.1 vlan102 up 200 200 3 default ospfv2
* 100.1.4.2 100.1.4.1 vlan103 up 200 200 3 default ospfv2
* 100.1.5.2 100.1.5.1 vlan104 up 200 200 3 default ospfv2
* 100.1.6.2 100.1.6.1 vlan105 up 200 200 3 default ospfv2
* 100.1.7.2 100.1.7.1 vlan106 up 200 200 3 default ospfv2
* 100.1.8.2 100.1.8.1 vlan107 up 1000 1000 3 default ospfv2
* 100.1.9.2 100.1.9.1 vlan108 up 200 200 3 default ospfv2
428
Layer 3