Connectivity Guide

Supported Releases 10.4.1.0 or later
route-map
Applies an established route-map to either incoming or outbound routes of a BGP neighbor or peer group.
Syntax
route-map route-map-name {in | out}
Parameters
• route-map-name — Enter the name of the congured route-map.
• in — attaches the route-map as the inbound policy
• out— attaches the route-map as the outbound policy
Defaults None
Command Modes
ROUTER-BGP-TEMPLATE-AF
Usage Information The no version of this command removes the route-map.
Example
OS10(conf-router-neighbor)# address-family ipv4 unicast
OS10(conf-router-bgp-neighbor-af)# route-map bgproutemap in
OS10(conf-router-template)# address-family ipv4 unicast
OS10(conf-router-bgp-template-af)# route-map bgproutemap in
Supported Releases 10.4.1.0 or later
route-reector-client
Congures a neighbor as a member of a route-reector cluster.
Syntax
route-reflector-client
Parameters None
Default Not congured
Command Mode ROUTER-TEMPLATE
Usage Information The device congures as a route reector, and the BGP neighbors congure as clients in the route-reector cluster.
The no version of this command removes all clients of a route reector—the router no longer functions as a route
reector.
Example
OS10(conf-router-template)# route-reflector-client
Supported Releases 10.3.0E or later
router bgp
Enables BGP and assigns an AS number to the local BGP speaker.
Syntax
router bgp as-number
Parameters as-number—Enter the AS number range.
• 1 to 65535 in 2-byte
Layer 3 481