Connectivity Guide

The suppressed status of aggregate routes may not display in the command output.
Example
OS10# show ip bgp summary
BGP router identifier 80.1.1.1 local AS number 102
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
80.1.1.2 800 24 23 00:09:15 5
Supported Releases 10.2.0E or later
show ip route
Displays information about IPv4 BGP routing table entries.
Syntax
show ip route
Parameters None
Default Not congured
Command Mode EXEC
Usage Information This command displays information about IPv4 BGP routing table entries.
Example
OS10# show ip route
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
----------------------------------------------------------------------------------------------------
C 10.1.1.0/24 via 10.1.1.1 ethernet1/1/17 0/0 01:18:34
B IN 100.1.1.0/24 via 10.1.1.2 200/0 00:03:46
B IN 101.1.1.0/24 via 10.1.1.2 200/0 00:03:46
B IN 102.1.1.0/24 via 10.1.1.2 200/0 00:03:46
B IN 103.1.1.0/24 via 10.1.1.2 200/0 00:03:46
B IN 104.1.1.0/24 via 10.1.1.2 200/0 00:03:46
Supported Releases 10.4.2.0 or later
show ipv6 route
Displays information about IPv6 BGP routing table entries.
Syntax
show ipv6 route
Parameters None
Default Not congured
Command Mode EXEC
Usage Information This command displays information about IPv6 BGP routing table entries.
Example
OS10# show ipv6 route
Supported Releases 10.4.2.0 or later
490 Layer 3