Connectivity Guide

show hash-algorithm
Displays hash-algorithm information.
Syntax
show hash-algorithm
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show hash-algorithm
EcmpAlgo - crc LabAlgo - crc
Supported Releases 10.3.0E or later
show ip ecmp-group details
Displays the number of ECMP groups and paths.
Syntax
show ip ecmp-group details
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show ip ecmp-group details
Maximum Number of ECMP Groups : 256
Maximum ECMP Path per Group : 64
Next boot configured Maximum ECMP Path per Group : 64
Supported Releases 10.4.3.0 or later
show load-balance
Displays the global trac load-balance conguration.
Syntax
show load-balance
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show load-balance
Load-Balancing Configuration For LAG & ECMP:
--------------------------------------------
IPV4 Load Balancing Enabled
IPV4 FIELDS : source-ipv4 dest-ipv4 vlan protocol L4-source-port L4-dest-port
Layer 3 501