Connectivity Guide

View IPv6 static information
OS10# show ipv6 route static
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
------------------------------------------------------------------
S 2111:dddd:eee::22/12via 2001:db86:fff::2 ethernet1/1/1 1/1 00:01:24
IPv6 commands
clear ipv6 neighbors
Deletes all entries in the IPv6 neighbor discovery cache or neighbors of a specic interface. Static entries are not removed.
Syntax
clear ipv6 neighbors [vrf vrf-name] [ipv6-address | interface | virtual-network
vn-id | all]
Parameters
• vrf vrf-name — (Optional) Enter vrf then the name of the VRF to clear the neighbor corresponding to
that VRF. If you do not specify this option, the neighbors in the default VRF clear.
• ipv6-address — Enter the IPv6 address of the neighbor in the x:x:x:x::x format to remove a specic IPv6
neighbor. The :: notation species successive hexadecimal elds of zero.
•
interface interface — To remove all neighbor entries learned on a specic interface, enter the keyword
interface then the interface type and slot/port or number information of the interface:
– For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet then the slot/port/subport[/subport]
information.
– For a 40-Gigabit Ethernet interface, enter fortyGigE then the slot/port information.
– For a port channel interface, enter port-channel then a number.
– For a VLAN interface, enter vlan then a number from 1 to 4093.
– virtual-network vn-id — For a virtual network, enter virtual-network then the ID of the
network.
Defaults None.
Command Mode EXEC
Usage Information
The no version of this command resets the value to the default.
Example
Supported Releases 10.4.1.0 or later or later
clear ipv6 route
Clears routes from the IPv6 routing table.
Syntax
clear ipv6 route [vrf vrf-name] {* | A::B/mask}
516 Layer 3