Connectivity Guide

• track-id—(Optional) Enter the track ID of the PBR object.
Defaults Not congured
Command Mode ROUTE-MAP
Usage Information
You must congure next-hop IP address tracking and PBR next-hop with the same VRF instance. For next-hop
reachability in the same VRF instance, you must congure both PBR per VRF and object tracking. Missing either
the next-hop IP address tracking or PBR next-hop conguration in a VRF instance results in an erroneous
conguration. However, the system does not display an error message indicating problems in the conguration.
Example
OS10(conf-route-map)# set ip next-hop 10.10.10.10 track-id 12
*Set the track ID configured to the route-map.
OS10(conf-route-map)# set ip vrf red next-hop 1.1.1.1 track-id 200
*Sets the track ID configured to track the next-hop reachable through the VRF
specified.
Supported Releases 10.3.0E or later
show policy
Displays policy information.
Syntax
show {ip | ipv6} policy [map-name]
Parameters map-name — (Optional) Enter the name of a congured route map. A maximum of 140 characters.
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show ip policy map-name
Supported Releases 10.3.0E or later
show route-map pbr-statistics
Displays the current PBR statistics.
Syntax
show route-map [map-name] pbr-statistics
Parameters map-name — (Optional) Enter the name of a congured route map. A maximum of 140 characters.
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show route-map map1 pbr-statistics
Supported Releases 10.3.0E or later
602 Layer 3