Connectivity Guide

Enable multicast ood control
Multicast ood control is enabled on OS10 by default. If it is disabled, use the following procedure to enable multicast ood control:
1 Congure IGMP snooping. To know how to congure IGMP snooping, see the IGMP snooping section.
2 Congure MLD snooping. To know how to congure MLD snooping, see the MLD Snooping section.
3 Enable the multicast ood control feature.
OS10(config)# multicast snooping flood-restrict
Multicast Commands
multicast snooping ood-restrict
Enables multicast snooping ood control for IGMP snooping and MLD snooping.
Syntax
multicast snooping flood-restrict
The no version of this command disables multicast ood control.
Parameters None
Default Enabled
Command Mode CONFIGURATION
Multicast 619