Connectivity Guide

0/0 pim-assert messages sent/received
404/110 register messages sent/received
Supported Releases 10.4.3.0 or later
show ip pim tib
Displays the PIM tree information base (TIB).
Syntax
show ip pim [vrf vrf-name] tib [group-address [source-address]]
Parameters
• vrf vrf-name—Enter the keyword vrf, then the name of the VRF.
• group-address—Enter the group address in dotted-decimal format (A.B.C.D).
• source-address—Enter the source address in dotted-decimal format (A.B.C.D).
Default None
Command Mode EXEC
Usage Information This command displays the following:
• S, G—Displays the entry in the multicast PIM database
• uptime—Displays the amount of time the entry has been in the PIM route table
• expires—Displays the amount of time until the entry expires and is removed from the database
• RP—Displays the IP address of the RP or source for the entry
• Incoming interface—Displays the reverse path forwarding (RPF) interface towards the RP/source
• RPF neighbor—Displays the next hop IP address from this interface towards the RP/source
• Outgoing interface list—Lists the interfaces that meet one of the following criteria:
– a directly connected member of the group
– a statically connected member of the group
– received an (*, G) or (S, G) join message
Example
OS10# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.1.1), uptime 13:08:24, expires 00:00:12, RP 171.1.1.1, flags: SCJ
Incoming interface: vlan105, RPF neighbor 3.1.1.1
Outgoing interface list:
vlan121 Forward/Sparse 13:07:53/Never
(101.1.1.10, 225.1.1.1), uptime 13:07:51, expires 00:06:09, flags: T
Incoming interface: vlan103, RPF neighbor 2.1.1.1
Outgoing interface list:
vlan121 Forward/Sparse 13:07:50/Never
Supported Releases 10.4.3.0 or later
654 Multicast