Connectivity Guide
do
Executes most commands from all CONFIGURATION modes without returning to EXEC mode.
Syntax
do command
Parameters command — Enter an EXEC-level command.
Default Not congured
Command Mode INTERFACE
Usage Information None
Example
OS10(config)# interface ethernet 1/1/7
OS10(conf-if-eth1/1/7)# no shutdown
OS10(conf-if-eth1/1/7)# do show running-configuration
...
!
interface ethernet1/1/7
no shutdown
!
...
Supported Releases 10.2.0E or later
feature cong-os9-style
Congure commands in an OS9 environment.
Syntax
feature config-os9-style
Parameters None
Default Not congured
Command Mode CONFIGURATION
Usage Information
After you enable the feature to congure commands in OS9 format, log out of the session. In the next session, you
can congure the commands in OS9 format. This feature does not have an impact on the show commands. Use
the no form of the command to disable the feature.
Example
OS10(config)# feature config-os9-style
OS10# show running-configuration compressed
interface breakout 1/1/28 map 10g-4x
feature config-os9-style
Supported Releases 10.3.0E or later
exit
Returns to the next higher command mode.
Syntax
exit
Parameters None
70 Getting Started