Connectivity Guide

interface
port-channel
number
Display only MAC addresses learned on the specied port channel.
static
Display only static MAC addresses.
dynamic
Display only dynamic MAC addresses.
Default Not congured
Command mode EXEC
Usage information By default, MAC learning from a remote VTEP is enabled. Use this command to verify the MAC addresses learned
both on VXLAN virtual networks and VLANs on the switch. The show mac address-table command displays
the MAC addresses learned only on LAN port and VLAN interfaces.
Example
OS10# show mac address-table extended
Virtual-Network VlanId MAC Address Type Interface/Remote-VTEP
----------------------------------------------------------------------------
- 500 00:00:00:00:11:11 dynamic ethernet1/1/31:1
- 500 00:00:00:00:44:44 dynamic port-channel1000
- 1 aa:bb:cc:dd:f0:03 static port-channel1000
- 500 aa:bb:cc:dd:f0:03 static port-channel1000
- 4000 aa:bb:cc:dd:f0:03 static port-channel1000
10000 00:00:00:00:00:11 dynamic ethernet1/1/31:1
10000 100 00:00:00:00:00:44 dynamic port-channel1000
10000 100 00:00:00:00:00:55 dynamic port-channel10
10000 00:00:00:00:00:77 dynamic VxLAN(32.1.1.1)
20000 300 00:00:00:00:00:22 dynamic port-channel100
20000 300 00:00:00:00:00:33 dynamic port-channel1000
20000 300 00:00:00:00:00:66 dynamic port-channel10
20000 00:00:00:00:00:88 dynamic VxLAN(32.1.1.1)
Supported releases 10.4.2.0 or later
show mac address-table nve
Displays MAC addresses learned on a VXLAN virtual network or from a remote VXLAN tunnel endpoint.
Syntax
show mac address-table nve {vxlan-vni vni | remote-vtep ip-address}
Parameters
vxlan-vni vni
Display MAC addresses learned on the specied VXLAN virtual network, from 1 to
16,777,215.
remote-vtep
ip-address
Display MAC addresses learned from the specied remote VTEP.
Default Not congured
Command mode EXEC
Usage information Use the clear mac address-table dynamic nve remote-vtep command to delete all MAC address
entries learned from a remote VTEP. Use the clear mac address-table dynamic virtual-network
vn-id command to delete all dynamic MAC address entries learned on a virtual-network bridge.
Example
OS10# show mac address-table nve remote-vtep 32.1.1.1
Virtual-Network VNI MAC Address Type Remote-VTEP
---------------------------------------------------------------
10000 9999 00:00:00:00:00:77 dynamic VxLAN(32.1.1.1)
20000 19999 00:00:00:00:00:88 dynamic VxLAN(32.1.1.1)
708 VXLAN