Connectivity Guide

Default Not congured
Command Mode All
Usage Information None
Example
OS10(conf-if-eth1/1/1)# exit
OS10(config)#
Supported Releases 10.2.0E or later
hostname
Sets the system host name.
Syntax
hostname name
Parameters name — Enter the host name of the switch, up to 64 characters.
Default OS10
Command Mode CONFIGURATION
Usage Information The host name is used in the OS10 command-line prompt. The no version of this command resets the host name
to OS10.
Example
OS10(conf)# hostname R1
R1(conf)#
Supported Releases 10.3.0E or later
license
Installs a license le from a local or remote location.
Syntax
license install [ftp: | http: | localfs: | scp: | sftp: | tftp: | usb:]
filepath
Parameters
• ftp: — (Optional) Install from the remote le system (ftp://userid:passwd@hostip/filepath).
• http[s]: — (Optional) Install from the remote le system (http://hostip/filepath).
• http[s]: — (Optional) Request from remote server (http://hostip).
• localfs: — (Optional) Install from the local le system (localfs://filepath).
• scp: — (Optional) Request from the remote le system (scp://userid:passwd@hostip/filepath).
• sftp: — (Optional) Request from the remote le system (sftp://userid:passwd@hostip/
filepath).
• tftp: — (Optional) Request from the remote le system (tftp://hostip/filepath).
• usb: — (Optional) Request from the USB le system (usb://filepath).
Default Not congured
Command Mode EXEC
Usage Information Use this command to install the Enterprise Edition license le. For more information, see Download OS10 image and
license. OS10 requires a perpetual license to run beyond the 120-day trial period. The license le is installed in
the /mnt/license directory.
Getting Started 71