Connectivity Guide

Example
OS10# license install scp://user:userpwd/10.1.1.10/CFNNX42-NOSEnterprise-
License.lic
License installation success.
Supported Releases 10.3.0E or later
line (alias)
Congures the commands to be executed in a multi-line alias.
Syntax
line nn command
Parameters
• nn — Enter the line number, from 1 to 99. The commands are executed in the order of the line numbers.
• command — Enter the command to be executed enclosed in double quotes.
Default Not congured
Command Mode ALIAS
Usage Information The no version of this command removes the line number and the corresponding command from the multi-line
alias.
Example
OS10(config)# alias mTest
OS10(config-alias-mTest)# line 1 "interface $1 $2"
OS10(config-alias-mTest)# line 2 "no shutdown"
OS10(config-alias-mTest)# line 3 "show configuration"
Supported Releases 10.4.0E(R1) or later
lock
Locks the candidate conguration and prevents any conguration changes on any other CLI sessions, either in Transaction or Non-
Transaction-Based Conguration mode.
Syntax
lock
Parameters None
Default Not congured
Command Mode EXEC
Usage Information The lock command fails if there are uncommitted changes in the candidate conguration.
Example
OS10# lock
Supported Releases 10.2.0E or later
management route
Congures an IPv4/IPv6 static route the Management port uses. Repeat the command to congure multiple management routes.
Syntax
management route {ipv4-address/mask | ipv6-address/prefix-length} {forwarding-
router-address | managementethernet}
72 Getting Started