Connectivity Guide
Parameters
• ipv4-address/mask — Enter an IPv4 network address in dotted-decimal format (A.B.C.D), then a subnet
mask in prex-length format (/xx).
• ipv6-address/prefix-length — Enter an IPv6 address in x:x:x:x::x format with the prex length
in /xxx format. The prex range is /0 to /128.
•
forwarding-router-address — Enter the next-hop IPv4/IPv6 address of a forwarding router
(gateway) for network trac from the Management port.
• managementethernet — Congure the Management port as the interface for the route; forces the route
to be associated with the Management interface.
Default Not congured
Command Mode CONFIGURATION
Usage Information Management routes are separate from IP routes and are only used to manage the system through the
Management port. To display the currently congured IPv4 and IPv6 management routes, enter the show ip
management-route and show ipv6 management-route commands.
Example (IPv4)
OS10(config)# management route 10.10.20.0/24 10.1.1.1
OS10(config)# management route 172.16.0.0/16 managementethernet
Example (IPv6)
OS10(config)# management route 10::/64 10::1
Supported Releases 10.2.2E or later
move
Moves or renames a le on the conguration or home system directories.
Syntax
move [config: | home: | usb:]
Parameters
• config: — Move from the conguration directory (config://filepath).
• home: — Move from the home directory (home://filepath).
• usb: — Move from the USB le system (usb://filepath).
Default Not congured
Command Mode EXEC
Usage Information Use the dir config command to view the directory contents.
Example
OS10# move config://startup.xml config://startup-backup.xml
Example (dir)
OS10# dir config
Directory contents for folder: config
Date (modified) Size (bytes) Name
--------------------- ------------ -----------
2017-04-26T15:23:46Z 26704 startup.xml
Supported Releases 10.2.0E or later
Getting Started 73