Connectivity Guide

no
Disables or deletes commands in EXEC mode.
Syntax
no [alias | debug | support-assist-activity | terminal]
Parameters
• alias — Remove an alias denition.
• debug — Disable debugging.
• support-assist-activity — SupportAssist-related activity.
• terminal — Reset terminal settings.
Default Not congured
Command Mode EXEC
Usage Information Use this command in EXEC mode to disable or remove a conguration. Use the no ? in CONFIGURATION mode
to view available commands.
Example
OS10# no alias goint
Supported Releases 10.2.0E or later
reload
Reloads the software and reboots the ONIE-enabled device.
Syntax
reload
Parameters None
Default Not congured
Command Mode EXEC
Usage Information
NOTE: Use caution while using this command as it reloads the OS10 image and reboots the device.
Example
OS10# reload
Proceed to reboot the system? [confirm yes/no]:y
Supported Releases 10.2.0E or later
show alias
Displays congured alias commands available in both Persistent and Non-Persistent modes.
Syntax
show alias [brief | detail]
Parameters
• brief — Displays brief information of the aliases.
• detail — Displays detailed information of the aliases.
74 Getting Started