Connectivity Guide

Default None
Command mode EXEC
Usage information
This command is available only for the sysadmin and secadmin roles. This command generates the SSL
certicate and restarts the OVSDB server to start using the newly generated certicate.
Example
OS10# nve controller ssl-key-generate
Supported releases 10.4.3.0 or later
show nve controller
Displays information about the controller and the controller-managed interfaces.
Syntax
show nve controller
Parameters None
Default None
Command mode EXEC
Example
OS10# show nve controller
Management IP : 10.16.140.29/16
Gateway IP : 55.55.5.5
Max Backoff : 1000
Configured Controller : 10.16.140.172:6640 ssl (connected)
Controller Cluster
IP Port Protocol Connected State Max-Backoff
10.16.140.173 6640 ssl true ACTIVE 1000
10.16.140.171 6640 ssl false BACKOFF 1000
10.16.140.172 6640 ssl true ACTIVE 1000
NVE Controller Ports
ethernet1/1/1:1
ethernet1/1/15
Supported releases 10.4.3.0 or later
show nve controller ssl-certicate
Displays the SSL certicate generated in the system.
Syntax
show nve controller ssl-certificate
Parameters None
Default None
Command mode EXEC
Usage information This command is available only for sysadmin and secadmin roles.
Example
OS10# show nve controller
-----BEGIN CERTIFICATE-----
MIIDgDCCAmgCAQMwDQYJKoZIhvcNAQENBQAwgYExCzAJBgNVBAYTAlVTMQswCQYD
VQQIDAJDQTEVMBMGA1UECgwMT3BlbiB2U3dpdGNoMREwDwYDVQQLDAhzd2l0Y2hj
776 VXLAN