Connectivity Guide
show inventory
Displays system inventory information.
Syntax
show inventory
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show inventory
Product : S4048ON
Description : S4048-ON 48x10GbE, 6x40GbE QSFP+ Interface Module
Software version : 10.4.3.0
Product Base :
Product Serial Number :
Product Part Number :
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------------
* 1 S4048ON 0J09D3 X01 TW-0J09D3-28298-49Q-0119 FFD7VS1 335 809 304 65
1 S4048ON-PWR-2-UNKNOWN 0T9FNW X01 TW-0T9FNW-28298-49Q-0041 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-1 0MGDH8 X01 TW-0MGDH8-28298-49Q-0361 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-2 0MGDH8 X01 TW-0MGDH8-28298-49Q-0360 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-3 0MGDH8 X01 TW-0MGDH8-28298-49Q-0359 AEIOU## 226 457 410 55
Supported Releases 10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the Management port.
Syntax
show ip management-route [all | connected | summary]
Parameters
• all — (Optional) Display the IPv4 routes that the Management port uses.
• connected — (Optional) Display only routes directly connected to the Management port.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv4 static and connected routes congured for the Management port. Use the
management route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported Releases 10.2.2E or later
Getting Started 79