Connectivity Guide

show ipv6 management-route
Displays the IPv6 routes used to access the Management port.
Syntax
show ipv6 management-route [all | connected | summary]
Parameters
• all — (Optional) Display the IPv6 routes that the Management port uses.
• connected — (Optional) Display only routes directly connected to the Management port.
• summary — (Optional) Display the number of active and non-active management routes and their remote
destinations.
• static — (Optional) Display non-active Management routes.
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the IPv6 static and connected routes congured for the Management port. Use the
management route command to congure an IPv4 or IPv6 management route.
Example
OS10# show ipv6 management-route
Destination Gateway State
----------- ------- -----
2001:34::0/64 ManagementEthernet 1/1 Connected
2001:68::0/64 2001:34::16 Active
Supported Releases 10.2.2E or later
show license status
Displays license status information.
Syntax
show license status
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to view the show license status command to verify the current license for running
OS10, its duration, and the service tag of the switch to which it is assigned.
Example
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : DELL
Product Name : S4048ON
Hardware Version : X01
Platform Name :
PPID : TW0J09D32829849Q0119
Service Tag : FFD7VS1
Product Base :
Product Serial Number:
Product Part Number :
License Details
----------------
80 Getting Started