Connectivity Guide

Supported Releases 10.4.0E(R1) or later
line vty
Enters the virtual terminal line mode to access the virtual terminal (VTY).
Syntax
line vty
Parameters None
Default Not congured
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# line vty
OS10(config-line-vty)#
Supported Releases 10.4.0E(R1) or later
logging audit enable
Enable the recording of conguration and security events in the audit log.
Syntax
logging audit enable
Parameters None
Defaults Not congured
Command Mode CONFIGURATION
Usage Information Audit log entries are saved locally and sent to congured Syslog servers. Only the sysadmin and secadmin roles
can enable the audit log. The no version of the command disables audit log recording.
Example
OS10(conf)# logging audit enable
Supported Releases 10.4.3.0 or later
login concurrent-session limit
Congures the maximum number of concurrent login sessions allowed for a user ID.
Syntax
login concurrent-session limit number
Parameters limit number — Enter the limit of concurrent login sessions, from 1 to 12.
Default 10 concurrent login sessions are supported.
Command Mode CONFIGURATION
Usage Information
The total number of concurrent login sessions for the same user ID includes all console and remote connections,
where:
• Each remote VTY connection counts as one login session.
• All login sessions from a terminal emulator on an attached console count as one session.
812 Security