Connectivity Guide

start
Activates Transaction-Based Conguration mode for the active session.
Syntax
start transaction
Parameters transaction - Enables the transaction-based conguration.
Default Not congured
Command Mode EXEC
Usage Information Use this command to save changes to the candidate conguration before applying conguration changes to the
running conguration.
NOTE: Before you start a transaction, you must lock the session using the lock command in EXEC
mode. Otherwise, the conguration changes from other sessions get committed.
Example
OS10# start transaction
Supported Releases 10.3.1E or later
system
Executes a Linux command from within OS10.
Syntax
system command
Parameters command — Enter the Linux command to execute.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# system bash
admin@OS10:~$ pwd
/config/home/admin
admin@OS10:~$ exit
OS10#
Supported Releases 10.2.0E or later
system-cli disable
Disables system command.
Syntax
system-cli disable
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command enables OS10 system command.
Getting Started 87