Connectivity Guide

8 (Optional) Check whether the next boot partition has changed to standby in EXEC mode.
show boot detail
9 Reload the new software image in EXEC mode.
reload
Image download
OS10# image download sftp://admin:passwd@10.1.1.1/home/admin/images/OS10EE.bin
Image install
OS10# image install image://OS10EE.bin
Show version
TR2# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2019 by Dell Inc. All Rights Reserved.
OS Version: 10.4.3.0
Build Version: 10.4.3.85
Build Time: 2019-02-18T17:06:10-0800
System Type: S4048-ON
Architecture: x86_64
Up Time: 2 days 05:58:01
Boot system partition
Set the boot partition to active or standby for subsequent boot cycles. Boot OS10 from standby to load the image on the standby partition,
or boot from active to load the currently running image.
1 Display current boot information in EXEC mode.
show boot detail
2 Congure the boot system in EXEC mode.
boot system [active | standby]
• active — Resets the running partition as the subsequent boot partition.
• standby — Sets the standby partition as the subsequent boot partition.
View boot detail
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: A
Active SW Version: 10.4.3E
Active SW Build Version: 10.4.3E.85
Active Kernel Version: Linux 4.9.110
Active Build Date/Time: 2019-02-18T09:06:10Z
Standby Partition: B
Standby SW Version: 10.4.3E
Standby SW Build Version: 10.4.3E.80
Standby Build Date/Time: 2019-02-17T15:36:08Z
Next-Boot: active[A]
View boot summary
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
92
System management