Connectivity Guide
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot [A] 10.4.3E [B] 10.4.3E [A] active
Upgrade commands
boot system
Sets the boot partition to use during the next reboot.
Syntax
boot system {active | standby}
Parameters
• active — Reset the running partition as the next boot partition.
• standby — Set the standby partition as the next boot partition.
Default Active
Command Mode EXEC
Usage Information Use this command to congure the location of the OS10 image used to reload the software at boot time. Use the
show boot command to view the congured next boot image. This command applies immediately and does not
require the commit command.
Example
OS10# boot system standby
Supported Releases 10.2.0E or later
image cancel
Cancels an active image download.
Syntax
image cancel
Parameters None
Default Not congured
Command Mode EXEC
Usage Information This command attempts to cancel an active le download in progress.
Example
OS10# image cancel
Supported Releases 10.2.0E or later
image copy
Copies the entire image in the active partition to the standby partition, a mirror image.
Syntax
image copy active-to-standby
Parameters active-to-standby — Enter to copy the entire image in the active partition to the standby partition, a mirror
image.
Default Not congured
System management 93