Service Manual

other-cong-ag
Enable the verication of the advertised other conguration parameter. If this command is not congured, the verication process is
bypassed.
Syntax
other-config-flag {on | off}
To reset the other conguration parameter, use the no other-config-flag {on | off} command.
Parameters
on Enter the keyword on to set the other-cong-ag value as ON.
o Enter the keyword off to set the other-cong ag value as OFF.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — dene the router advertisement (RA) guard policy name and enter the
RA guard policy conguration mode.
reachable-time
Enable the verication of the congured reachability time in the received RA packets.
Syntax
reachable—time value
To reset the advertised reachability time, use the no reachable-timevalue command.
Parameters
value Enter the advertised reachability time in milliseconds. The range is from 0 to 3,600,000
milliseconds.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Neighbor Discovery Protocol (NDP) 1061