Service Manual

Output Description
Tracked by Client that is tracking an object’s state; for example, VRRP.
Example
Dell# show track
Track 1
IP route 23.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is TenGigabitEthernet 1/2
Tracked by:
VRRP TenGigabitEthernet 2/3 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is TenGigabitEthernet 1/2
Tracked by:
VRRP TenGigabitEthernet 2/3 IPv6 VRID 1
Usage Information The following describes the show track brief command shown in the Example below.
Output Description
ResID Number of the tracked object.
Resource Type of tracked object.
Parameter Detailed description of the tracked object.
State Up or Down state of the tracked object.
Last Change Time since the last change in the state of the tracked object.
Example (Brief)
Dell> show track brief
ResId Resource Parameter State LastChange
1 IP route reachability 10.16.0.0/16 Up 00:01:08
2 Interface line-protocol Ethernet0/2 Down 00:05:00
3 Interface ip routing VLAN100 Up 01:10:05
Related Commands
• show running-cong track – display conguration information about tracked objects.
• track interface ip routing – congure object tracking on the routing status of an IPv4 Layer 3 interface.
• track interface line-protocol – congure object tracking on the line-protocol state of a Layer 2 interface.
• track ip route metric threshold – congure object tracking on the threshold of an IPv4 route metric.
• track ip route reachability – congure object tracking on the reachability of an IPv4 route.
threshold metric
Congure the metric threshold used to determine the UP and/or DOWN state of a tracked IPv4 or IPv6 route.
Syntax
threshold metric {up number | down number}
1072 Object Tracking