Service Manual

Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:30
First-hop interface is TenGigabitEthernet 1/2
Tracked by:
VRRP TenGigabitEthernet 2/4 IPv6 VRID 1
Usage Command The following describes the show track ipv6 route brief command shown in the Example below.
Ouput Description
ResID Number of the tracked object.
Resource Type of tracked object.
Parameter Detailed description of the tracked object.
State Up or Down state of the tracked object.
Last Change Time since the last change in the state of the tracked object.
Example (Brief)
Dell# show track ipv6 route brief
ResId Resource Parameter State LastChange
2 IPv6 route metric threshold 2040::/64 Up 00:02:36
3 IPv6 route reachability 2050::/64 Up 00:02:36
Related Commands
show running-cong track – display conguration information about tracked objects.
show track – display information about tracked objects, including conguration, current state, and clients which
track the object.
track interface ipv6 routingcongure object tracking on the routing status of an IPv6 Layer 3 interface.
track ipv6 route metric thresholdcongure object tracking on the threshold of an IPv6 route metric.
track ipv6 route reachabilitycongure object tracking on the reachability of an IPv6 route.
track interface ipv6 routing
Congure object tracking on the routing status of an IPv6 Layer 3 interface.
Syntax
track object-id interface interface ipv6 routing
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
interface Enter one of the following values:
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port[/subport] information.
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
For a port channel interface, enter the keywords port-channel then a number.
For a tunnel interface, enter the keyword tunnel.
Object Tracking 1081