Service Manual
debug ip pim
View IP PIM debugging messages.
Syntax
debug ip pim [vrf vrf-name] [bsr | events | group | packet [in | out] |
register | state | timer [assert | hello | joinprune | register]]
To disable PIM debugging, use the no debug ip pim [vrf vrf-name] command or use the undebug
all to disable all debugging command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view IP PIM
debugging messages corresponding to that VRF.
NOTE: Applies to specic VRF if input is provided, else applies to Default
VRF.
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword group to view PIM messages for a specic group.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specic group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of the optional
parameters:
• in: to view incoming packets
• out: to view outgoing packets
register (OPTIONAL) Enter the keyword register to view PIM register address in dotted
decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert | hello
| joinprune |
register]
(OPTIONAL) Enter the keyword timer to view PIM timers. Enter one of the optional
parameters:
• assert: to view the assertion timer
• hello: to view the PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
1206 PIM-Sparse Mode (PIM-SM)