Service Manual
NOTE: Only one of the IP precedence values must be a successful match criterion, not all of the
specied IP precedence values must match.
Related Commands
• class-map — identies the class map.
match ip vlan
Uses a VLAN as the match criterion for an L3 class map.
S4048–ONS4048–ON
Syntax match ip vlan vlan-idTo remove VLAN as the match criterion, use the no match ip vlan vlan-id
command.
Parameters
vlan vlan-id Enter the keyword vlan and then the ID of the VLAN. The range is from 1 to 4094.
Defaults None.
Command Modes CONF-CLASS-MAP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information To access this command, enter the class-map command. After the class map is identied, you can congure the
match criteria.
Use this command to match an IP class-map against a single VLAN ID .
Related Commands
• class-map — identies the class map.
match ip vrf
Uses a VRF as the match criterion for an L3 class map.
S4048–ON
Syntax
match ip vrf vrf-id
To remove VRF as the match criterion, use the no match ip vrf vrf-id command.
Quality of Service (QoS) 1279