Service Manual
policy-map-input
Create an input policy map.
S4048–ON
Syntax
policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos]
To remove an input policy map, use the no policy-map-input policy-map-name cpu-qos |
[layer2] [cpu-qos] command.
Parameters
policy-map-name Enter the name of the policy map in character format (32 characters maximum).
cpu-qos Enter the cpu-qos keyword to assign this ACL to control plane trac only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The default is
Layer 3.
cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to rate-limit
control-plane trac (CoPP).
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Expanded to add support for Layer 2.
6.1.1.1 Introduced on the E-Series.
Usage Information The input policy map is used to classify incoming trac to dierent ows using class-map, QoS policy, or incoming
packets DSCP. This command enables Policy-Map-Input Conguration mode (conf-policy-map-in). When you
congure an input policy map for CoPP, you must enter the keyword cpu-qos .
1284 Quality of Service (QoS)