Service Manual

Version Description
pre-6.1.1.0 Introduced on the E-Series.
Usage Information The following describes the show user command shown in the following example.
Field Description
(untitled) Indicates with an asterisk (*) which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
Dell# show users
Authorization Mode: role or privilege
Line User Role Priv
Host(s) Location
* 0 console 0 unassigned 1 idle
2 vty 0 admin unassigned 1
idle 10.16.127.35
3 vty 1 ad unassigned 15
idle 10.16.127.145
4 vty 2 ad1 sysadmin 1
idle 10.16.127.141
5 vty 3 ad1 sysadmin 1
idle 10.16.127.145
6 vty 4 admin unassigned 1
idle 10.16.127.141
7 vty 5 ad unassigned 15
idle 10.16.127.141
Dell#
Related Commands
• username — enables a user.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before timing out.
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Enter a number of seconds the software waits before logging you out. The range is:
• VTY — range is from 1 to 30 seconds, the default is 30 seconds.
• Console — range is from 1 to 300 seconds, the default is 0 seconds (no timeout).
• AUX — range is from 1 to 300 seconds, the default is 0 seconds (no timeout).
Defaults See Parameters.
Command Modes LINE
Security 1401