Service Manual

Related Commands
• dot1x authentication (Interface) — enable dot1x on an interface.
dot1x authentication (Interface)
Enable dot1x on an interface; dot1x must be enabled both globally and at the interface level.
Syntax
dot1x authentication
To disable dot1x on an interface, use the no dot1x authentication command.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Related Commands
• dot1x authentication (Conguration) — enable dot1x globally.
dot1x auth-fail-vlan
Congure an authentication failure VLAN for users and devices that fail 802.1X authentication.
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number]
To delete the authentication failure VLAN, use the no dot1x auth-fail-vlan vlan-id [max-
attempts number] command.
Parameters
vlan-id Enter the VLAN Identier. The range is from 1 to 4094.
max-attempts
number
(OPTIONAL) Enter the keywords max-attempts then number of attempts desired
before authentication fails. The range is from 1 to 5. The default is 3.
Security 1421