Service Manual

Version Description
7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping
Enable DHCP Snooping globally.
Syntax
[no] ip dhcp snooping
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information
When enabled, no learning takes place until you enable snooping on a VLAN. After disabling DHCP Snooping, the
binding table is deleted and Option 82, IP Source Guard, and Dynamic ARP Inspection are disabled.
Related Commands
ip dhcp snooping vlan — enable DHCP Snooping on one or more VLANs.
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address
interface type slot/port lease number
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is leasing
the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range is
from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is leasing.
1458 Security