Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1471

Command Modes CONF-IF-VLAN

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.11.1 Introduced on the Z9000.

8.5.1.1 Added support for 802.1X, E-LMI, GMRP, GVRP, LLDP, LACP, MMRP, MVRP, and OAM

802.3ah protocol trac to the E-Series.

8.2.1.0 Introduced on the C-Series, E-Series, and E-Series.

7.4.1.0 Introduced

Example

Dell# conf

Dell(conf)#interface vlan 2

Dell(conf-if-vl-2)#vlan-stack compatible

Dell(conf-if-vl-2)#member Te 1/2-3

Dell(conf-if-vl-2)#protocol-tunnel stp

Dell(conf-if-vl-2)#protocol-tunnel enable

Related Command

• show protocol-tunnel — displays tunneling information for all VLANs.

protocol-tunnel destination-mac

Overwrite the BPDU destination MAC address with a specic value.

Syntax

protocol-tunnel destination-mac xstp address

Parameters

stp Change the default destination MAC address used for L2PT to another value.

Defaults The default destination MAC is 01:01:e8:00:00:00.

Command Modes CONFIGURATION