Service Manual
Version Description
7.6.1.0 Introduced on the S-Series.
Usage Information
Without the page or stack-unit option, the command output is continuous. To interrupt the command
output, use Ctrl-z.
The save option works with other ltering commands. This allows you to save specic information of a show
command. The save entry must always be the last option. For example: Dell#show tech-support |grep
regular-expression |except regular-expression | find regular-expression | save
flash://result
This display output is an accumulation of the same information that is displayed when you execute one of the
following show commands:
• show version
• show clock
• show running-config
• show system stack-ports
• show interfaces
• show process memory
• show process cpu
• show file system
• show system
• show environment
• show ip traffic
• show ip management route
• show ip route summary
• show Inventory
• show log summary
• show command-history (last 20 commands)
• show log
Example (S-Series)
Dell# show tech-support ?
page Page through output
stack-unit Unit Number
| Pipe through a command
<cr>
Dell#show tech-support stack-unit 1 ?
| Pipe through a command
<cr>
Dell# show tech-support stack-unit 1 | ?
except Show only text that does not match a pattern
find Search for the first occurrence of a pattern
grep Show only text that matches a pattern
no-more Don't paginate output
save Save output to a file
Dell# show tech-support stack-unit 1 | save ?
flash: Save to local file system (flash://filename (max 20
chars) )
Dell# show tech-support stack-unit 1 | save flash://LauraSave
Start saving show command report .......
Dell#
Dell# dir
Directory of flash:
1 drw- 16384 Jan 01 1980 00:00:00 +00:00 .
2 drwx 1536 Jul 13 1996 02:38:06 +00:00 ..
3 d--- 512 Nov 20 2007 15:46:44 +00:00 ADMIN_DIR
Dell#
Example
148 Control and Monitoring