Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1521

Defaults 6 or informational

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series, S55.

7.5.1.0 Introduced on the C-Series.

E-Series legacy

command

Usage Information To block a type of message parameter, set the logging trap level to a lower number. For example, to block severity

messages at level 6, set the level to 5.

Related Commands

• logging — enables the logging to another device.

• logging on — enables logging.

logging version

Displays syslog messages in a RFC 3164 or RFC 5424 format.

Syntax

logging version {0|1}

Defaults