Service Manual

Related Commands
• ip address — assigns a primary and secondary IP address to the interface.
write
Copy the current conguration to either the startup-conguration le or the terminal.
Syntax
write {memory compressed| terminal}
Parameters
memory Enter the keyword memory to copy the current running conguration to the startup
conguration le. This command is similar to the copy running-config startup-
config
command.
compressed Enter the keyword compressed to write the operating conguration to the startup-
cong le in the compressed mode.
terminal Enter the keyword terminal to copy the current running conguration to the terminal.
This command is similar to the show running-config command.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information The write memory command saves the running-conguration to the le labeled startup-conguration. When
using a LOCAL CONFIG FILE other than the startup-cong not named “startup-conguration” (for example, you
used a specic le during the boot config command), the running-cong is not saved to that le; use the
copy command to save any running-conguration changes to that local le.
156 Control and Monitoring