Service Manual

Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
Each contact person must be unique by their name.
You can congure only one contact person.
It is not possible to remove the rst name or last name. The no form of the command removes the entire contact-
person entry.
This command is optional for SupportAssist service conguration.
enable
Enable all activities and severs for the SupportAssist service.
Syntax
enable all
To return to the default setting, use the no enable all command.
Parameters
all Enter the keyword all to enable all SupportAssist service activities.
Defaults Enabled or All Enabled
Command Modes SUPPORTASSIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
server
Congure the name of the remote SupportAssist Server and move to SupportAssist Server mode.
Syntax
server {default | server-name}
To delete a server, use the no server server-name command.
Parameters
default Enter the keyword default for the default server.
server-name Enter the name of the remote SupportAssist Server. To include a space, enter a space
within double quotes.
Defaults Default server has URL stor.g3.ph.dell.com
1578 SupportAssist