Service Manual

Command Modes SUPPORTASSIST
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
The server-name is used as a reference only and is not required to be used as part of a URL denition.
There is a reserved name of default for the default server at stor.g3.ph.dell.com. You can customize the defaults
for this server by entering the server default command and use the custom commands.
You can congure one additional server.
SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest le for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification> <local-file-name>
Parameters
le-specication
Enter the full le specication for the action-manifest le. For example:
• tftp://hostip/lepath
• ftp://userid:password@hostip/lepath
• scp://userid:password@hostip/lepath
local-le-name Enter the name of the local action-manifest le, up to 32 characters long. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
Command Modes SUPPORTASSIST ACTIVITY
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information The remote le specication includes the protocol that is used to copy the le from the remote system.
Related Commands
• action-manifest install — congure the action-manifest to use for a specic activity.
SupportAssist 1579