Service Manual
Version Description
8.4.1.0 Introduced on the C-Series and S-Series.
Related Commands
• dot1x host-mode — enable single-host or multi-host authentication.
dot1x port-control
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
force-authorized Enter the keywords force-authorized to forcibly authorize a port.
auto Enter the keyword auto to authorize a port based on the 802.1X operation result.
force-unauthorized Enter the keywords force-unauthorized to forcibly de-authorize a port.
Defaults None
Command Modes Auto
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information The authenticator completes authentication only when you set port-control to auto.
dot1x prole
Congure a dot1x prole to dene a list of trusted supplicant MAC addresses.
Syntax
[no] dot1x profile profile-name
168 802.1X