Service Manual

Related Commands vxlan-instance— Enable VXLAN Instance conguration on the platform.

vxlan-instance

Enable VXLAN Instance conguration on the platform.

Syntax

vxlan-instance instance ID

To enable the vxlan-instance command, use the [no] shut command.

To delete vxlan-instance from the system, use no vxlan-instance 1 command.

Parameters

instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the initial

release.

Defaults Disabled

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0) Introduced on the S4048–ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Introduced on the S6000.

Usage Information You must congure VXLAN globally before using VXLAN-instance.

Related Commands feature vxlan — Enable VXLAN conguration globally on the platform.

vxlan-instance (VAP)

To congure a VXLAN-Access Port (VAP) in to VXLAN-instance