Service Manual

Version Description
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
mac
Congure a list of supplicant MAC addresses for dot1x prole represented with a prole-name.
Syntax
[no] mac {mac-address1 mac-address2… mac-address6}
Parameters
mac-address1 mac-
address2… mac-
address6
Enter the keyword mac and type the 48– bit MAC addresses using the H.H.H format. A
maximum of 6 MAC addresses are allowed.
Defaults None
Command Modes
DOT1X PROFILE CONFIG (conf-dot1x-prole)
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 series, S4048–ON, S4048–ON, S4810, S4820T, S5000, S6000,
S6000–ON, the Conguration Terminal Batch mode on C9010, Z9100–ON, and Z9500.
9.9(0.0) Introduced on the C9010.
Usage Information
The mac command congures a list of supplicant MAC addresses for a dot1x prole represented with a prole-
name. You can congure up to 6 MAC addresses in a single mac command. The maximum number of MAC
addresses that you can congure in a single prole is limited to 100.
Use this command in Conguration Terminal Batch mode to congure a list of supplicant MAC addresses for dot1x
prole in a dual-homing setup.
Example
Dell(conf)#dot1x profile mySupplicants
Dell(conf-dot1x-profile)#mac 00:50:56:AA:01:10 00:50:56:AA:01:11
Dell(conf-dot1x-profile)#show config
802.1X 175