Service Manual

match ip route-source
To match based on the routes advertised by routes specied in IP access lists or IP prex lists, congure a lter.
Syntax
match ip route-source {prefix-list prefix-list-name}
To delete a match, use the no match ip route-source {prefix-list prefix-list-name}
command.
Parameters
prex-list prex-list-
name
Enter the keywords prefix-list and then enter the name of congured prex list, up
to 140 characters.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up
to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
• match interface — redistribute routes that match the next-hop interface.
• match ip address — redistribute routes that match an IP address.
• match ip next-hop — redistribute routes that match the next-hop IP address.
• match metric — redistribute routes that match a specic metric.
• match route-type — redistribute routes that match a route type.
• match tag — redistribute routes that match a specic tag.
244 Access Control Lists (ACL)